7 inline LEDs + a custom designed lens creates a floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is 1.5:1, for example, the beam diameter is 3 ft wide when the light is 2 ft from an object.
Penlight Beam
Custom designed flood reflector creates a handy narrow beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 1:2, for example, the beam diameter is 1 ft wide when the light is 2 ft from an object. The ANSI FL-1 beam throw is 157 ft (48 m).
Power/Brightness Switch
Push button switch cycles through Work Light-Penlight-Off...
Battery Included
3.7V 800mAh LiPo (Li-ion Polymer) rechargeable battery; USB recharging cord included
Run Time
Work Light: 1.5 hours, Penlight: 2 hours
Recharge Time
2.5 hours
Battery Life and Charge Indicator
Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level
Charging Input
Micro USB
Aluminum Body
Rugged Aluminum with Red Type II Anodizing and Black Plastic Accents
Magnetic Penclip
A handy magnet is built into the penclip (430: increased magnetic strength)
Length
7 inches (18 cm)
Width
7/8 inches (2.2 cm)
Thickness
1/2 inches (1.3 cm)
Weight
2.2 ounce (61 grams)
Temperature
15º to 105ºF (-10º to +40ºC)
Ingress Protection
IPX3 = not water resistant, do not immerse in liquids.
